House Deep Cleaning:

1. Clear the Area:

   • We remove furniture and any obstacles from the floor to ensure easy access.

2. Sweep or Vacuum:

   • We begin by sweeping or vacuuming the floor to remove loose dirt and debris.

3. Choose the Right Cleaning Solution:

   • We select a suitable cleaning solution based on the type of flooring you have (e.g., wood, tile, laminate, carpet). We follow manufacturer recommendations for cleaning products to avoid damage.

4. Spot Treatment:

   • We address any stubborn stains or spots with appropriate stain removers or specialized cleaners. We ensure that these products are compatible with your flooring.

5. Mop or Scrub:

   • We use a mop, sponge, or scrub brush, depending on the flooring type, to apply the cleaning solution evenly. 

6. Rinse:

   • We make sure to thoroughly rinse the floor to remove any residue. For some types of flooring, we may use a damp mop for rinsing.

7. Dry the Floor:

   • We allow the floor to air dry or use a clean, dry mop or towel to speed up the drying process. Then, we ensure the floor is completely dry before replacing furniture or allowing foot traffic.

1. Gather Your Supplies:

• Rubber gloves
• All-purpose cleaner or bathroom cleaner
• Disinfectant
• Baking soda
• White vinegar
• Toilet bowl cleaner
• Microfiber cloths or sponges
• Old toothbrush
• Scrub brush
• Squeegee
• Bucket
• Mop

2. Declutter:

• We remove items from countertops, shelves, and shower/tub area.

3. Dusting:

• We dust surfaces like light fixtures, vents, and exhaust fans using a microfiber cloth or a duster.

4. Wipe Down Surfaces:

• Using an all-purpose cleaner, we wipe down countertops, sinks, and any other surfaces. For tough stains, we make a paste with baking soda and water.

5. Clean Mirrors:

• We use a glass cleaner or a mixture of water and vinegar to clean mirrors. Then, we wipe in a circular motion for streak-free results.

6. Scrub the Shower and Tub:

• We apply a bathroom cleaner or a mixture of equal parts vinegar and water to the surfaces. Then, we scrub with a brush or sponge. For grout, we use an old toothbrush.

7. Clean Shower Curtain and Liner:

• If you have a fabric curtain, we check the care instructions and wash accordingly. For plastic liners, we soak them in a mixture of water and vinegar.

8. Clean Toilet:

• We apply toilet bowl cleaner inside the bowl and let it sit. Then, we wipe down the exterior with a disinfectant or all-purpose cleaner.

9. Clean Floors:

• We Sweep or vacuum the floor first. Then we mop with a suitable floor cleaner. We pay attention to corners and edges.

10. Clean Fixtures:

• We wipe down faucets, handles, and any other fixtures. We use a toothbrush for hard-to-reach areas.

11. Empty Trash:

• We empty the trash and clean the trash can if needed.

12. Ventilation:

• We ensure proper ventilation by cleaning exhaust fans and vents. Dust and wipe them down as needed.

13. Final Touches:

• We replace clean towels, refill soap dispensers, and arrange items neatly.

1. Gather Supplies:

• Trash bags
• Cleaning cloths or sponges
• Dish soap
• All-purpose cleaner
• Degreaser
• Baking soda
• White vinegar
• Microfiber cloths
• Old toothbrush (for tight spaces)
• Mop and bucket
• Vacuum cleaner with attachments
• Oven cleaner (if applicable)

2. Declutter:

• We remove items from countertops, shelves, and drawers.
• We dispose of expired or unused food.
• We take out trash and recycling.

3. Dismantle and Clean Appliances:

• We unplug and clean small appliances like toasters, coffee makers, and blenders.
• We clean inside and outside of the refrigerator, microwave, and oven.
• We pull out the refrigerator and clean behind it.

4. Clean Cabinets and Drawers:

• We wipe down cabinet surfaces, inside and out.
• We clean drawer interiors.
• We use a degreaser for areas near the stove.

5. Scrub Countertops:

• We use an all-purpose cleaner to clean countertops.
• For stubborn stains, we make a paste of baking soda and water.

6. Clean Sink and Faucet:

• We scrub the sink with a mild abrasive cleaner.
• We clean the faucet and handles.
• We pour a cup of baking soda down the drain, followed by a cup of white vinegar. Flush with hot water after 10 minutes.

7. Clean and Sanitize Cutting Boards:

• If your cutting boards are dishwasher-safe, we run them through a cycle.
• Otherwise, we wash them with hot, soapy water.

8. Wash Dishes and Utensils:

• We hand wash or load the dishwasher.
• We wipe down dish racks and utensil organizers.

9. Clean Floors:

• We sweep or vacuum the floor to remove loose dirt.
• We mop with a floor cleaner suitable for your flooring type.

10. Dust and Wipe Surfaces:

• We dust light fixtures, vents, and any decor.
• We wipe down walls and baseboards.

11. Address Hidden Areas:

• We clean behind and beneath large appliances.
• We check for hidden spills or crumbs in tight spaces.

12. Replace Filters:

• We replace the range hood filter and water filter in the refrigerator.

13. Disinfect High-Touch Areas:

• We disinfect doorknobs, handles, and light switches.

14. Check Expiry Dates:

• We inspect pantry items and discard expired goods.

15. Finishing Touches:

• We replace liners in trash cans and recycling bins.
• We add a fresh box of baking soda to absorb odors in the refrigerator.

1. Check the Manufacturer’s Instructions:

Before we begin, we check the care label on your sofa for any specific cleaning instructions provided by the manufacturer.

2. Remove Loose Debris:

We use a vacuum cleaner with an upholstery attachment to remove loose dirt, dust, and debris from the surface of the sofa. Also, we pay special attention to crevices, seams, and under cushions.

3. Identify Stains:

We identify any stains on the sofa and determine the appropriate stain removal method based on the type of stain (e.g., water-based, oil-based). We do not use harsh chemicals that may damage the fabric.

4. Pre-Treat Stains:

We Pre-treat stubborn stains with a suitable stain remover or a mixture of mild detergent and water. We follow the instructions on the product or the cleaning solution we use and test it on an inconspicuous area first to ensure it won’t damage the fabric.

5. Clean the Entire Sofa:

We use a suitable upholstery cleaner or a mild soapy solution to clean the entire sofa. We use a soft brush or a clean, damp cloth to apply the cleaning solution. We work in small sections and avoid oversaturating the fabric.

6. Rinse the Sofa:

We use a soapy solution and then rinse the sofa thoroughly to remove any soap residue. We use a clean, damp cloth for this step. We also ensure that we don’t leave the sofa excessively wet, as this can lead to mold or mildew growth.

7. Dry the Sofa:

We allow the sofa to air dry completely and then open windows or use fans to speed up the drying process. We avoid using excessive heat sources as they can damage certain fabrics.

8. Fluff and Brush:

Once the sofa is dry,  we fluff and brush the fabric to restore its texture. This step is particularly important for fabric sofas to prevent the fabric from becoming stiff.

9. Apply Fabric Protector:

We consider applying a fabric protector after cleaning to help repel future stains. We also follow the product instructions carefully, and make sure the sofa is completely dry before applying.

10. Replace Cushions and Pillows:

Once the sofa is entirely dry and we’re satisfied with the cleanliness, we replace the cushions and pillows.